Publicidad
support@nextlevelracing.com
56
Install the HOTAS Mount Assembly to the H Frame. Please refer to Step 24 to 27 for HOTAS Mount
Assembly.
A)
B)
Repeat
on Other
57
A) Align the Flight Arm Assembly with the threaded inserts on the Motion V3 Mounting Arm.
B) Bolt through and secure with 4 x M8 Bolts and Washers. Repeat the same for the Mouse Plate Assembly.
58
Your setup is complete.
32
PARTS:
• • NIL
PARTS:
• • 8 x M8 16mm Sockethead Bolts
• • 8 x M8 Washers
Side
PARTS:
• • NIL
FLIGHT ARM ADJUSTMENT
59
Loosen the Bolts on the Flight Arm Assembly, adjust to the desired position and tighten the Bolts to
secure.
FLIGHT/MOUSE PLATE ADJUSTMENT
60
Loosen Bolts securing the Flight Plate to the Flight Arm Assembly. Adjust to the desired position and
tighten the Bolts to secure.
33
Video Instruction: bit.ly/nlrbuild
PARTS:
• • NIL
Front View
PARTS:
• • NIL
Side View
Publicidad
