Publicidad
support@nextlevelracing.com
45
Align the threaded inserts on the Motion Plus Platform with the mounting holes on the Frames.
Repeat
on Other
Side
46
Bolt through and secure with 4 x M8 Bolts and Washers. Repeat on the other side.
47
Align the mounting holes on the Pivot Bar Assembly with the threaded inserts on the Flight Stand Pro.
Bolt through and Secure with 4 x M8 Bolts and Washers.
28
PARTS:
• • NIL
PARTS:
• • 2 x M8 55mm Sockethead Bolts
• • 2 x M8 60mm Sockethead Bolts
• • 4 x M8 Washers
M8 60mm
M8 55mm
Side View
PARTS:
• • 4 x M8 25mm Hex Head Bolts
(included in the Motion Plus
Platform kit of parts)
• • 4 x M8 Washers (included in the
Motion Plus Platform kit of parts)
BUTTKICKER POLE INSTALLATION
(SKIP TO STEP 44 FOR MOTION V3 PLATFORM INSTALLATION)
A)
B)
Note: The Buttkicker pole can be
installed in the front or rear end of the
H Frame according to preference.
48
A) Align the mounting holes on the Buttkicker pole with the holes on the H Frame.
B) Bolt through and secure with 2 x M8 Bolts, Washers and Flange Nuts.
MOTION V3 PLATFORM
INSTALLATION
A)
B)
49
A) Uninstall Bolts securing the Flight Arm Assembly and the H Frame to the Frame Members. Remove the Flight Arm Assembly.
B) Remove the Flight Seat Assembly.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 1 x Buttkicker Pole
• • 2 x M8 60mm Sockethead Bolts
• • 2 x M8 Washers
• • 2 x M8 Flange Nuts
PARTS:
• • NIL
29
Publicidad
