Publicidad
support@nextlevelracing.com
34
Align the slots on the Frame of the Flight Seat Pro to the threaded inserts on the Frame of the Flight
Stand Pro.
Repeat
on Other
Side
35
Bolt through and secure with Bolts and Washers previously uninstalled in Step 33a. Repeat on the
other side.
36
Bolt through the mounting cut-outs and secure with 2 x M8 Bolts and Washers.
24
PARTS:
• • NIL
37
PARTS:
SEAT BELT INSTALLATION
• • NIL
A)
38
PARTS:
• • 2 x M8 16mm Sockethead Bolts
• • 2 x M8 Washers
39
Re-install Plastic Caps previously uninstalled in Step 33a.
B)
A) Slide the Seat all the way backwards.
B) Thread the Seat Belt through Seat Belt cut outs on the Flight Seat.
Repeat
on Other
Side
Align the Seat Belt mounting plates with the threaded inserts on the bottom of the Flight Seat. Bolt
through and secure with 2 x M8 Bolts and Washers.
25
Video Instruction: bit.ly/nlrbuild
PARTS:
• • NIL
PARTS:
• • 1 x Seat Belt
PARTS:
• • 2 x M8 16mm Sockethead Bolts
• • 2 x M8 Washers
Publicidad
