Publicidad
support@nextlevelracing.com
A)
B)
Repeat
on Other
Side
01
A) Align the Left and Right Frame Members with the threaded inserts on the End Panel.
B) Bolt through and secure with 2 x M8 Bolts and Washers. Repeat on the other side.
A)
B)
Repeat
on Other
Side
02
A) Align the mounting holes on the Safety Step with the threaded inserts on the Left and Right Frame Member.
B) Bolt through and secure with 3 x M8 Bolts and Washers. Repeat on the other side.
B)
A)
Repeat
on Other
Tip : Leave Bolts loosely
Side
secured to allow installation
of extra Bolts in future steps.
03
A) Align the Left and Right Side Panels with the mounting holes on the Frame Members.
B) Bolt through and secure with 4 x M8 Bolts, Washers and Flange Nuts. Repeat on the other side.
PARTS:
• • 1 x Left Frame Member
• • 1 x Right Frame Member
(LEFT)
(RIGHT)
• • 1 x End Panel
• • 4 x M8 55mm Sockethead Bolts
• • 4 x M8 Washers
PARTS:
• • 1 x Safety Step
• • 6 x M8 16mm Sockethead Bolts
• • 6 x M8 Washers
PARTS:
• • 1 x Left Side Panel
• • 1 x Right Side Panel
(LEFT)
(RIGHT)
• • 8 x M8 55mm Sockethead Bolts
• • 8 x M8 Washers
• • 8 x M8 Flange Nuts
12
A)
B)
Repeat
on Other
Side
04
A) Align the threaded inserts on the H Frame with the mounting holes on the Frame Members.
B) Bolt through and secure with 2 x M8 Bolts and Washers. Repeat on the other side.
RECOMMENDED MOUNTING POINTS
Note: If setting up the Flight
Seat on uneven floors we
recommend installing the
Height Adjustable Feet to
stabilise the cockpit.
Warning: Square Washers
should always be used when
installing Castor Wheels
to prevent damage to the
Frame Members.
05
Align the Castor Wheels and Square Washers with the threaded inserts on the Frame Members.
Fasten and secure using the 14mm Wrench.
B)
A)
Repeat
on Other
Side
06
A) Align the Steel Safety Caps with the mounting holes on the Frame Members.
B) Bolt through the mounting holes and secure with 2 x M8 Bolts and Washers. Repeat on the other side.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 1 x H Frame
• • 4 x M8 55mm Sockethead Bolts
• • 4 x M8 Washers
PARTS:
• • 4 x M8 Square Washers
• • 4 x Castor Wheels/ Height
Adjustable Feet
OR
BOTTOM VIEW
PARTS:
• • 1 x Left Safety Steel Cap
• • 1 x Right Safety Steel Cap
• • 4 x M8 16mm Sockethead Bolts
• • 4 x M8 Washers
13
Publicidad
