Publicidad
support@nextlevelracing.com
WARNING: The NLR Motion V3 is
heavy and will require 2 people to
install the setup.
50
Align the Motion V3 unit with the mounting holes on the Frame.
Repeat
on Other
Side
51
Bolt through and secure with 6 x M8 Bolts and Washers.
52
Align the threaded inserts at the bottom of the H Frame installed on the Flight Seat with the mounting
slots on the Motion V3 Platform.
30
PARTS:
• • NIL
A)
53
PARTS:
SEAT BELT INSTALLATION
• • 6 x M8 55mm Sockethead Bolts
A)
• • 6 x M8 Washers
54
PARTS:
• • NIL
55
B)
A) Bolt through the front mounting holes of the Motion V3 platform and secure with 2 x M8 Bolts and Washers.
B) Bolt through the rear mounting holes of the Motion V3 platform and secure with 2 x M8 Bolts and Washers.
B)
A) Align the threaded inserts on the Motion V3 Mounting Arm with the mounting holes on the H Frame.
B) Bolt through and secure with 2 x M8 Bolts and Washers. Repeat on the other side.
Repeat
on Other
Side
Align the Seat Belt Mounting Plate with the rear mounting hole on the Motion V3 Mounting Arm. Bolt through the
Seat Mounting Plate at the rear and secure with 2 x M8 Bolts and Washers. Repeat on the other side.
31
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 4 x M8 16mm Sockethead Bolts
• • 4 x M8 Washers
PARTS:
Repeat
on Other
• • 2 x Motion V3 Mounting Arm
Side
• • 4 x M8 16mm Sockethead Bolts
• • 4 x M8 Washers
PARTS:
• • 4 x M8 55mm Sockethead Bolts
• • 4 x M8 Washers
Publicidad
