Publicidad
support@nextlevelracing.com
A)
B)
13
A) Align the threaded inserts on the Telescopic Inner Arm with the mounting slot on the Telescoping Outer Arm.
B) Bolt through and secure with 2 x M8 Bolts and Washers.
B)
A)
Tip: Install the Flight Plate
on the opposite side of your
mouse location.
14
A) Align the mounting slots on the Flight Plate with the threaded inserts on the Telescoping Inner Arm.
B) Bolt through and secure with 4 x M8 Bolts and Washers.
A)
B)
15
A) Align the mounting holes on the Flight Arm with the threaded inserts on the Frame Member.
B) Bolt through and secure with 4 x M8 Bolts and Washers.
16
PARTS:
A)
• • 1 x Telescoping Inner Arm
• • 2 x M8 16mm Sockethead Bolts
• • 2 x M8 Washers
16
PARTS:
A)
• • 1 x Flight Plate
• • 4 x M8 16mm Sockethead Bolts
• • 4 x M8 Washers
17
PARTS:
A)
• • 1 x Flight Arm
• • 4 x M8 16mm Sockethead Bolts
• • 4 x M8 Washers
18
B)
A) Align the mounting slots on the Telescoping Outer Arm with the threaded inserts on the Flight Arm.
B) Bolt through and secure with 4 x M8 Bolts and Washers.
B)
A) Align the threaded inserts on the Telescopic Inner Arm with the mounting slot on the Telescoping Outer Arm.
B) Bolt through and secure with 2 x M8 Bolts and Washers.
B)
Tip: The Flight and Mouse
Plates are interchangeable
which allows them to be
mounted on both sides.
A) Align the mounting slots on the Mouse Plate with the threaded inserts on the Telescoping Inner Arm.
B) Bolt through and secure with 4 x M8 Bolts and Washers.
17
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 1 x Telescoping Outer Arm
• • 4 x M8 16mm Sockethead Bolts
• • 4 x M8 Washers
PARTS:
• • 1 x Telescoping Inner Arm
• • 2 x M8 16mm Sockethead Bolts
• • 2 x M8 Washers
PARTS:
• • 1 x Mouse Plate
• • 4 x M8 16mm Sockethead Bolts
• • 4 x M8 Washers
Publicidad
