Parts And Controls - Stihl FS 100 RX Manual De Instrucciones

English / USA

Parts and Controls

Part 1
1. Fuel Filler Cap
For closing the fuel tank.
2. Carburetor Adjusting Screws
For tuning the carburetor.
3. Starter Grip
The grip of the pull starter, which is
the device to start the engine.
4. Spark Plug Boot
Connects the spark plug to the
ignition lead.
5. Muffler
(with spark arresting screen*)
Reduces exhaust noises and
diverts exhaust gases away from
operator.
34
6. Throttle Trigger
Controls the speed of the engine.
7. Slide Control
For starting throttle, run and stop.
Keeps the throttle partially open
during starting, switches the
engine's ignition off to stop the
engine.
8. Throttle Trigger Interlock
Must be depressed before the
throttle trigger can be activated.
9. Carrying Ring
Connects the brushcutter to the
harness.
10. Fuel Pump
Provides additional fuel feed for a
cold start.
11. Choke Knob
Operates choke to enrich the
mixture for easier engine starts.
12. Air Filter Cover
Encloses and protects the air filter.
13. Fuel Tank
For fuel and oil mixture.
14. Machine Support
For resting machine on the ground.
15. Loop Handle
For easy control of machine during
operation.
# Serial number
* see „Guide to Using this Manual"
FS 100 RX