JVC DT-E17L4G Manual De Instrucciones página 18

Menu Configuration (cont.)
Audio Setting
Settings for the audio output balance, EMBEDDED AUDIO signals and audio level meter signal.
Item To do
Balance Adjust the balance between the right and left speakers.
Audio1 Assign Select the video input through which audio is output.
Analog audio is input through the AUDIO ASSIGN (IN 1) terminal.
Audio2 Assign Select the video input through which audio is output.
Analog audio is input through the AUDIO ASSIGN (IN 2) terminal.
Embedded Audio Group* Select the audio channel group of the EMBEDDED AUDIO signals.
1
The setting values and selectable audio channels of EMBEDDED AUDIO signals are as
follows. (G means GROUP)
1G
2G
1-2G
3G
1-3G
4G
1-4G
Level Meter Setting* 1 Specify the audio level meter display for EMBEDDED AUDIO signal.
Example of audio level meter display - Connection between the level meter position and channel
Ex: When "Horizontal" is selected for "Level Meter Display":
• The number of audio channels displayed on the level meter varies depending on the setting value of "Embedded Audio
• The level meter with no audio signal input is displayed in white for "3COLORS", and in gray for "White".
• Display position
• When "On" is selected for "Peak Hold", the maximum value is retained a certain period when the signal level becomes
Level Meter Display Select the status of the level meter (display vertically, horizontally, or not displayed).
Horizontal Channel Select how the audio channels are displayed on the level meter.
Arrange
Vertical Position Adjust the vertical level meter position.
Horizontal Position Adjust the horizontal level meter position.
Meter Type Specify the design of the level meter.
Color Select the color of the level meter display.
Reference Level Select the standard input level indicated on the level meter.
Over Level Select the input level's lower limit indicated in red for the "3Colors" display.
Bar Brightness Select the brightness of the level meter.
Transparent Adjust the transparency of the level meter display against the image.
Peak Hold Activates/deactivates the peak hold function of the level meter.
* 1 Memorized for each input.
16
: channel(s) 1/2/3/4/1+2/3+4/1 – 4 (1G)
: channel(s) 5/6/7/8/5+6/7+8/5 – 8 (2G)
: channel(s) 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 – 4 (1G)/5 – 8 (2G)/
1 – 8 (1G+2G)
: channel(s) 9/10/11/12/9+10/11+12/9 – 12 (3G)
: channel(s) 1/2/3/4/5/6/7/8/9/10/11/12/1+2/
3+4/5+6/7+8/9+10/11+12/1–4(1G)/5–8(2G)/
9–12(3G)/1–8(1G+2G)/1–12(-3G)
: channel(s) 13/14/15/16/13+14/15+16/13–16(4G)
: channel(s) 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/1+2/3+4/
5+6/7+8/9+10/11+12/13+14/15+16/1–4(1G)/5–8(2G)/9–12(3G)/13-16(4G)/
1–8(1G+2G)/1–12(1-3G)/1-16(1-4G)
OVER LEVEL
-20dB -10dB
Group".
When "Horizontal" is selected for "Level Meter Display", the display position will be the top or bottom of the screen.
When "Vertical" is selected for "Level Meter Display", the display position will be the lower right, lower left, upper left, or
upper right of the screen.
maximum.
Ex: When "Vertical" is selected for "Level Meter Display":
REFERENCE
OVER LEVEL
LEVEL
-10dB -20dB
Red
Yellow
Green
REFERENCE LEVEL
Setting value
L5 – L1, 0, R1 – R5
SDI-1, SDI-2, HDMI-Digital,
HDMI-Analog, Component/
RGB, Video
SDI-1, SDI-2, HDMI-Digital,
HDMI-Analog, Component/
RGB, Video
1G, 2G, 3G, 4G, 1-2G, 1-3G,
1-4G
-10dB
-20dB
Off, Vertical, Horizontal
Line, Divide
1, 2, 3, 4
Upper, Lower
Bar, Block
3Colors (colored depending
on the level),
White (white only)
–20dB, –18dB
–10dB, –8dB, –6dB, –4dB,
–2dB
Low, High
Off, Background, All
Off, On