Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Precautions
The LCD panel and backlight have life expectancy. Due to the basic characteristics of the LCD panel, an afterimage or uneven display
may occur. It is recommended that you change images occasionally, activate the power saving function, or often turn off the power to
reduce the load on the LCD panel. Continuous operations of the LCD panel may accelerate the deterioration.
Caution for use of the product for many hours
In the case that you use the monitor for many hours, we recommend that you set "No Sync Action" in "Sync Function" to "Power Save" in
Main Menu. This will reduce power consumption and relieve strain on the monitor. To reduce damage to the LCD panel, using the LCD
Saver function is recommended.
Caution for use of the product in the high temperature
Do not use the product in places of high temperature; otherwise, parts of this product or the LCD panel may be damaged. This product is
equipped with a temperature sensor to give warning if the temperature becomes too high. If the temperature exceeds the range of normal
use, "Temp. Over" is displayed, and the power is turned off automatically if the temperature becomes any higher. In this case, move the
product to a place of low temperature to let it cool down.
Maintenance
Unplug this product from the wall outlet before cleaning.
Screen
To avoid irreparable change in appearance of the screen such
as uneven color, discoloration, scratches, be careful about the
following:
●
Do not paste or stick anything using any glues or adhesive
tapes.
●
Do not write anything on the screen.
●
Do not strike the screen with a hard object.
●
Avoid condensation on the screen.
●
Do not wipe the screen with any liquid such as water. In
addition, wiping the screen with water-diluted neutral
detergent or solvent such as alcohol, thinner, or benzine may
affect the anti-reflection treatment of the screen.
●
Do not wipe the screen forcefully.
Wipe stains off the screen with a soft cloth. If the screen gets
heavily stained, wipe it with a soft cloth soaked in water-diluted
neutral detergent and wrung well, then wipe with a soft dry cloth.
Table of Contents
Safety Precautions . . . . . . . . . . . . . . . . . . . 2
f
IMPORTANT SAFEGUARDS
Operating Precautions . . . . . . . . . . . . . . . 5
Caution for use of the product for many hours
Caution for use of the product in the high temperature
Maintenance
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connections . . . . . . . . . . . . . . . . . . . . . . . . .
Rear panel
Daily Operations . . . . . . . . . . . . . . . . . . . .
Front panel
Menu Configuration . . . . . . . . . . . . . . . . .
The operation procedure
Menu Transition Diagram
Main Menu
Set-Up Menu
Cabinet
To avoid the deterioration or damages of the cabinet such as its
paint's peeling away, be careful about the following:
●
Do not wipe the cabinet using solvent such as alcohol, thinner,
or benzine.
●
Do not expose the cabinet to any volatile substance such as
insecticides.
●
Do not allow any rubber or plastic in contact for a long time.
●
Do not wipe the cabinet forcefully.
Wipe stains off the cabinet with a soft cloth. If the cabinet gets
heavily stained, wipe it with a soft cloth soaked in water-diluted
neutral detergent and wrung well, then wipe with a soft dry cloth.
Ventilation openings
Use a vacuum cleaner to get rid of the dust around the intakes (all
the openings). If a vacuum cleaner is not available, use a cloth and
wipe it off. Leaving the dust around the intakes may prevent proper
temperature control and cause damage to the product.
External Control . . . . . . . . . . . . . . . . . . . . .22
2
About the external control
Using the Make/Trigger system
Using the serial communication
5
Troubleshooting . . . . . . . . . . . . . . . . . . . .25
5
5
Self-check program
Specifications . . . . . . . . . . . . . . . . . . . . . . .27
6
General
8
LCD panel
Input/output terminals
8
Dimensions
10
Available signals
10
12
12
13
14
17
EN
EN
22
22
23
26
27
27
27
28
29
5
Publicidad
