Descargar Imprimir esta página

JVC DT-E17L4G Manual De Instrucciones página 29

Ocultar thumbs Ver también para DT-E17L4G:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 132
Specifications
General
Model name
Type
Screen size
Aspect ratio
Horizontal/vertical frequency
(computer signal)
Compliant video signal format
Format
Audio output
Operating conditions
Power requirements
Rated current
External dimensions
(excluding protruding parts)
Weight
Accessories
LCD panel
Type
21˝ wide, active matrix TFT
Effective screen size
Width:
Height:
Diagonal: 547 mm
Number of pixels displayed
1920 x 1080
Number of colors displayed
16.70 million
Viewing angle (TYP.)
170° (Horizontally), 160° (Vertically)
Brightness (TYP.)
250 cd/m
Contrast ratio (TYP.)
1000:1
Input/output terminals
VIDEO
HDMI
COMPO./RGB
(R, G, B, HS, VS or Y, Pb/B-Y,
Pr/R-Y)
E. AUDIO HD/SD SDI (IN 1)
E. AUDIO HD/SD SDI (IN 2)
E. AUDIO HD/SD SDI
(SWITCHED OUT)
AUDIO (IN)
AUDIO (MONITOR OUT)
REMOTE (MAKE/TRIGGER)
REMOTE (RS-485)
REMOTE (RS-232C)
DT-E21L4
Multi format LCD monitor
Type 21 wide format
16:9
H:
31.469 kHz – 75.000 kHz
V:
49.990 Hz – 75.062 Hz
* Some signals within this frequency range may not be displayed ("Out of range" is displayed).
☞ "Available signals" on page 29
HD SDI:
BTA S-004C, SMPTE292M
SD SDI:
ITU-R BT.656:
SMPTE259M:
EMBEDDED AUDIO:
SMPTE299M, SMPTE272M
Internal speaker: 1.0 W + 1.0 W
Operating temperature: 5°C – 35°C
Operating humidity: 20% – 80% (non-condensing)
(Slightly variable depending on ambient conditions for installation.)
AC 220 V - 240 V, 50 Hz/60 Hz or DC 12 V – 17 V
0.4 A (AC 220 V - 240 V)
3.5 A (DC 12 V - 17 V)
Width: 515 mm
515 mm
Height: 352.1 mm
347 mm
Depth: 181 mm
99.8 mm
(with the stand)
(without the stand)
7.7 kg (with the stand)
6.2 kg (without the stand)
AC power cord x 2, Power cord holder x 1, Screw x 2 (for power cord holder)
477 mm
268 mm
2
Input/output of composite signal:
HDMI signal input (compatible with HDCP):
Analog Component signal input/Analog RGB signal input:
Digital signal input (compatible with EMBEDDED AUDIO signals):
auto detection, 2 line, BNC connector x 2
Digital signal output (compatible with EMBEDDED AUDIO signals):
1 line switched out, BNC connector x 1
Analog audio signal input:
2 line, RCA connector x 2, Stereo mini Jack x1, 500 mV (rms), high impedance
Analog audio signal output:
1 line, RCA connector x 2, 500 mV (rms)
☞ "Using the Make/Trigger system" on page 22
☞ "Using the serial communication" on page 23
DT-E17L4G
Type 17 wide format
525/625
525
0.3 A (AC 220 V - 240 V)
3.0 A (DC 12 V - 17 V)
Width: 430 mm
Height: 314.1 mm
Depth: 181 mm
(with the stand)
7.1 kg (with the stand)
5.6 kg (without the stand)
17˝ wide, active matrix TFT
Width:
382 mm
Height:
215 mm
Diagonal: 438 mm
160° (Horizontally), 60° (Upward), 80° (Downward)
300 cd/m
2
600:1
1 line, BNC connector x 2, 1 V (p-p), 75 Ω
* The input (IN) and output (OUT) terminals are bridge-connected
(auto termination).
HDMI connector x 1
1 Line, mini D-SUB 15pin x1
Y: 1 V(p-p), 75 Ω(with sync)
G, B/PB/B-Y, R/PR/R-Y: 0.7 V (p-p), 75 Ω
HS, VS: 0.3 V (p-p) to 5 V (p-p)
* For HS and VS, change the Low/High terminals manually.
EN
EN
430 mm
309 mm
102 mm
(without the stand)
27

Publicidad

loading

Este manual también es adecuado para:

Dt-e21l4Dt-e17l4