Publicidad
Idiomas disponibles
Idiomas disponibles
Information
Settings for the information display of the monitor.
Item
To do
Source ID
Select whether the name assigned in "Character Setting" is displayed on the screen (☞ "On
the Information Display" on page 11).
• When "Auto" is selected, the display color synchronizes with the color of the tally lamp
while the tally lamp is lit.
Character Setting
Assign a name to each video source as you like (10 characters at maximum). You can also enter a name using the RS-232C
system. (☞ Page 20)
Status Display
Display/Hide the status of the current input and the setting of MUTING. (☞ "On the Status
Display" on page 12)
Time Code
Select the type of the TIME CODE display.
CRC Error
Display/Hide the CRC error when the HD SDI signal is input. (☞ "On the Information Display"
on page 11)
Sub Hour Meter
Display the hours of use (unit: hour). The usage time can be reset to 0.
Model
Display the model name of the monitor.
Version
Display the version of the monitor.
Hour Meter*
2
Display the total hours of use (unit: hour). This item is used for maintenance of the monitor. You cannot reset this item.
*
1
Ancillary time code
*
2
"Hour Meter" and settings specified using the front knob are not reset.
Control Lock*
3
Setting values: Off, Volume Lock, All Lock
Settings for disabling the buttons on the front panel.
*
3
• The following operations are not available when "Volume Lock" is selected.
- Picture adjustment knob
• The "All Lock" function disables to control the buttons on the front panel. But following operations are available.
- Turning on/off (on standby) the monitor
- Displaying the Set-Up Menu by pressing
- Operating the monitor by an external control
If you try other operations, "Control lock on!" appears on the screen.
Language
Setting values: English, Deutsch, Français, Español, Italiano, Pуccĸий
Select the displayed language for the menu, etc.
IMD
Settings for IMD (In-monitor Display). (☞ Page 20)
Item
To do
IMD Display
Display setting
On: Displayed, Off: Not displayed
IMD Protocol
Serial communication protocol setting
Off: Supports JVC protocol, TSL V4.0: Supports TSL UMD Protocol V4.0
Address
Address setting
000 to 126: Set a particular address
IMD Size
Text size setting
Small: Small size, Middle: Standard size, Large: Large size
Text Color
Text color setting
Command: Same color as that set for communication (Command)
Red, Green, Amber, Blue, Cyan, Magenta, White: Color settings
Tally 1 Color
Tally 1 color setting
Command: Same color as that set for communication (Command)
Red, Green, Amber, Blue, Cyan, Magenta, White: Color settings
Tally 2 Color
Tally 2 color setting
Command: Same color as that set for communication (Command)
Red, Green, Amber, Blue, Cyan, Magenta, White: Color settings
Background Color
Display background color setting
Black: Set the background of the IMD display to black
Translucent: The picture on the monitor shows through the IMD display.
Transparent: Set the background of the IMD display transparent.
reset
Return the "IMD" settings to their default values
all reset
Restores all the settings and adjustments of the monitor to the default.
button while holding
button and turning "Control Lock" to "Off"
Setting value
Off, On, Auto
Auto, Off, On
VITC*
1
, LTC*
1
, D-VITC
Off, On
Setting value
On, Off
Off, TSL V4.0
000 to 126
Small, Middle, Large
Command, Red, Green, Amber,
Blue, Cyan, Magenta, White
Command, Red, Green, Amber,
Blue, Cyan, Magenta, White
Command, Red, Green, Amber,
Blue, Cyan, Magenta, White
Black, Translucent, Transparent
19
EN
EN
Publicidad
