BTS MTZ-P Serie Manual Del Usuario página 26

1. GENERAL PROVISIONS
Purpose of this user manual:
-
Familiarize service personnel with the rules for installing, maintaining and repairing the pump,
and explain how to start, operate and stop the pump.
-
Keep this manual in a safe place so that it can be easily accessed by the authorized
representative of the manufacturer responsible for the safe operation and maintenance of
the pump.
-
The pump must not be operated under conditions other than those specified in the purchase order.
Because the operating conditions specified in the purchase order are taken into account when selecting
the material and testing it.
-
BTS ENGINEERING shall not be liable for warranty if there are changes in the design of the
pump or repair work performed by the user or unauthorized persons.
-
The instructions in this manual must be carefully studied and applied in every installation and
operation of the pump to avoid misuse.
-
Responsible personnel must be experienced and have knowledge of the relevant standards.
-
If it is necessary to operate the pump under conditions not specified in the purchase order,
contact an authorized BTS ENGINEERING service center. BTS ENGINEERING is not liable for any
damage that may result from operation under the conditions specified above without a written
service authorization.
-
If the pump is not in use for a long time, it must be stored in a room with the
appropriate temperature and humidity specified in this manual.
-
The user is responsible for inspection and installation by authorized personnel who have read
and understood this user manual.
-
This user manual does not cover all safety rules that should or may apply in the area of
use.
-
The service life of pumps before overhaul is at least 5 years, subject to the requirements
set forth in this manual.
3