Amprobe MEGATEST 1000 Manual Del Propietário página 23

5.3.2 RECALL
If you want to recall the stored test results proceed as follows:
1.
RCL
2.
3.
DISP
4.
Press the ESC key at any point you want to quit the memory
ESC
management mode and go back to the selected measuring function.
Press the RCL key.
If the memory of the instrument is not
empty it
alongside.
Number of the memory location in which
the measurement results were stored.
Value of the parameter P related to the
saved measurement.
If the memory of the instrument is
empty it
alongside.
Use the keys ,
displayed.
Press the DISP key to display the test result related to the selected
memory location.
Use the keys ,
memory locations.
displays the screen
displays the screen
to select the memory location number to be
again if you want to display again the numbers of
22
MEM
3
P02
Riso
o
rcl
no