Amprobe MEGATEST 1000 Manual Del Propietário página 14

In case the mode R+TIMER or R-
TIMER was selected and a R+ or R-
higher than 9.99Ω was detected, the
instrument emits an intermittent
sound signal during the test, a
long sound signal at the end of the
test and displays
alongside.
ATTENTION: value of R+ or R- is too high.
The tests can be stored pressing the SAVE key twice (see
SAVE
paragraph 0).
In case that:
R -R
MEASURED CALIBRATION
instrument displays
alongside.
ATTENTION: R
MEASURED
Selected mode:
AUTO).
The tests can be stored pressing the SAVE key twice (according to
SAVE
paragraph 0).
the screen
< 0Ω the
the screen
-R < 0 .
CALIBRATION
(in this case
13
Ω
CAL LOW
o> 9.99
Ω
- - - 4
mA s
R+
TIMER
blinking CAL.
Ω
CAL LOW
o 0.00
Ω
219
mA
AUTO
9.99Ω is the
maximum
value which
can be
measured in
LOWΩ,
R+TIMER
or R-TIME R
mode.