Publicidad
Idiomas disponibles
Idiomas disponibles
7. CONNECTING INSTRUMENT TO PC
The connection between PC and instrument is realised through the serial port and optical
serial cable, provided with the software package "SUPERLINK".
Before making the connection it is necessary to select the COM port used for the
transmission. To set this parameter, start "SUPERLINK" and look in the help menu.
o
ATTENTION:
To transfer the stored data from the instrument to the PC keep to the following procedure:
1. Turn the switch on position RS232.
2. By means of the FUNC key select the mode "Ser":
FUNC
Then proceed according to the software instruction manual to transfer
the measurements effected.
The selected port shall NOT be shared by other devices or
applications (example mouse, modem, etc.).
The
communication
instrument and PC occurs by means
of the SUPERLINK software.
Transmission speed to be set in the
software
(see
parameters): 9600 baud.
between
Options,
System
34
SEr
Publicidad
