Hanging Installation - Cameo H2 D Manual De Usuario

HANGING INSTALLATION

Important safety information: Overhead mounting requires extensive experience, including the calculation of the load limit
values of the installation material and regular safety inspection of all installation materials and spotlights! If you do not have
these qualifi cations, do not attempt to carry out the installation yourself; contact a professional company!
The mounting bracket can be completely removed from the spotlight to create a refi ned and uniform look in the case of hanging installa-
tions.
To do this, unscrew the two knurled screws
bases B on both sides of the spotlight. Cover the mounting holes
parts for later use.
A
Hang the spotlight using only the safety eyebolt
E
from the mounting bracket and then remove it. An 0.11-inch Allen key is used to loosen the
A
C with the sliding metal rails in the grooves
B
E and the appropriate suspension cable intended for this purpose.
D . Hold onto all detached
C D
13