Kingfisher CLAG60LKBL Manual De Instrucciones página 71

EN Use
Before you start
WARNING: Read the instructions before using the appliance.
Switch on the Residual Current Device (RCD) at the consumer unit. The appliance is ready for use.
EN Functions & Settings
01 Control panel
To obtain the best results from your cooker hood it is recommended that you leave it switched on for up to 15
minutes after you have finished cooking.
1
1. Light On/Off
2. Fan On/Off and Speed Reduction
3. LED Display
To Set Up For First Use
IMPORTANT: Complete this set up within two minutes of turning on the
Residual Current Device (RCD).
Ducted Option This is the factory default setting if you are extracting air to the outside.
Recirculation Option
1. Press both speed icons
2. Press the Timer button
3. Press Speed Increase
4. Press the Timer button
5. Press and hold both Speed buttons
automatically after 30 seconds.
02 General Use
Light On/Off
• Use this control to switch the light on independently of the fan motor and the icon will be red.
• When the fan is in use, and the light is off, the icon will be white but will turn red if the light is then
switched on.
5059340446028_MNL_IN_V04.indb 70 5059340446028_MNL_IN_V04.indb 70
2
This is the option to be used with carbon filters.
together for 3 seconds, and all icons will flash.
to enter the Set Up mode. The Timer icon will turn red.
or Speed Reduction
again to confirm the setting and return to the Set Up mode after five seconds.
for three seconds to exit Set Up, or this will happen
3 4
4. Speed Increase
5. Timer
to select or .
70
5
8/6/2022 3:15 PM 8/6/2022 3:15 PM