Flex FX3211 Manual Del Operador página 13

FILTER COVER (FIG. 7)
Using the filter cover will protect the interior of
the tool from debris and extend the life of the
tool.
a. Remove the battery pack.
b. To attach the filter cover, snap the hook of
one section of the filter cover into the groove
at tool's foot first, and then press the other
end into the other groove.
c. To remove the filter cover, pry the filter cover
away from the tool.
d. To clean the filter cover, tap it against a hard
surface or blow it clean with compressed air.
Fig. 7
Groove
-13-
Hook