Sony HSR-X216 Manual De Instrucciones página 10

Locations and Functions of Parts
8 Record/Playback buttons
A X PAUSE button and indicator
B x STOP button
l ALARM L
PRE REVERSE PLAY
S PAUSE s STOP
REC
TIMER
STOP
F REC STOP button
E TIMER button and indicator
A X PAUSE button and indicator (amber)
When you press this button during playback or while
monitoring a camera input, the unit enters Still-Picture
mode, and the indicator lights.
Press the button again to restore the previous mode.
B x STOP button
Press this button to end playback (including that of
Still-Picture or Variable-Speed Playback mode).
C . ALARM > skip buttons
During playback of an alarm recording event, pressing
. skips to the previous alarm recording event, and
pressing > skips to the next alarm recording event.
During playback of an event in the archive area,
pressing . skips to the previous event, and pressing
> skips to the next event.
D B PLAY/PRE REVERSE PLAY button and
indicator (green)
When you press this button in stop status, the indicator
lights, and playback begins.
For details, see "Normal Playback" on page 45(GB).
By pressing the button during recording, you can view
the recorded images from the point before the
specified pre-reverse time (1 to 99 minutes) without
stopping the recording in progress (Pre-Reverse
Playback).
For details on the operation, see "Pre-Reverse Playback"
on page 46(GB).
10
(GB)
C . ALARM > skip buttons
D B PLAY/PRE
REVERSE PLAY
button and
indicator
G PLAY
a REC
G z REC button and indicator
E TIMER button and indicator (red)
When you press this button, the unit enters timer-
standby status, and the indicator lights. Recording will
begin at the starting time you specified using the
menu, and the REC button indicator will light.
Pressing the button again cancels timer-standby status
or timer recording in progress.
For details on the operation, see "Timer Recording" on
page 40(GB).
F REC STOP button
Press this button to end recording.
G z REC button and indicator (red)
When you press this button, the indicator lights, and
recording begins.
9 MENU button
When you press this button, the unit enters Menu
mode.
In Menu mode, you can switch the submenus or the
menu items in sequence.
For details on the operation, see "Menu Operations" on
page 15(GB).
0 EXIT/OSD button
Press to quit Menu mode.
In modes other than Menu mode, this button functions
as the on-screen data switch.
Each time you press the button, the position of the on-
screen data will change in sequence of bottom, no
display, and top (default: top).
For details on the on-screen data, see "On-screen Data" on
page 14(GB).
qa SHUTTLE HOLD button and indicator (green)
By pressing this button to light the indicator, you can
lock the direction and speed of playback dictated by
the current orientation of the Shuttle dial.
When you press the button again, the mode before you
start the variable-speed playback will be restored.
For details on the operation, see "Variable-Speed
Playback" on page 46(GB).
qs Shuttle dial (outer)
When you rotate the Shuttle dial in Playback mode
(PLAY button indicator lit) or in Still-Picture mode
(PAUSE button indicator lit), playback is performed
according to the direction and degree of the rotation.
For details on the operation, see "Variable-Speed
Playback" on page 46(GB).