Security Lock Settings - Sony HSR-X216 Manual De Instrucciones

Preparations

Security Lock Settings

You can activate the security lock on operation by
setting passwords.
Use the submenu 3. SECURITY LOCK SET of the
main menu 3. GENERAL SET.
1
Select 3. GENERAL SET from the main menu.
2
Select 3. SECURITY LOCK SET from the
submenu.
The SECURITY LOCK SET display appears.
<SECURITY LOCK SET>
LEVEL PASSWORD(4-8)
ADMIN AJE23535
USER 1593
REC CONTROL
The validity of the security lock depends on the
USE ON/OFF and REC CONTROL settings (see
the table below).
3
Set the ADMIN (administrator) password.
The password can be a character string of 4 to 8
alphanumerics.
Turn the Jog dial to select a character and turn the
Shuttle dial clockwise to advance to the next.
In this condition, the INPUT SELECTOR buttons
1 to 9 function as numeric buttons, and any of the
MULTI, QUAD, OPTION and MONITOR 2
buttons can be used to input 0 (zero).
You can set the values by pressing these buttons
instead of turning the Jog dial.
4
To validate the ADMIN password, set USE OFF to
ON and turn the Shuttle dial clockwise.
Setting USE to ON on the ADMIN line enables
you to set the USER password.
66
(GB)
USE
OFF
OFF
: ADMIN
5
Set the USER password in the same manner as the
ADMIN password and set USE OFF to ON and
turn the Shuttle dial clockwise to validate the
USER password
Note
You cannot set only USER USE to ON. When you
set ADMIN USE to OFF, USER USE is also set to
OFF.
6
Select the lock level for recording operations on
the REC CONTROL line.
USER: Not only administrators, but also users
may perform recording operations.
ADMIN: Only administrators may perform
recording operations. Users are permitted to
perform playback operations only.
Turn the Jog dial to select, and turn the Shuttle dial
clockwise to register your setting.
7
To exit the menu, press he EXIT/OSD button.
To activate the security lock
After exiting Menu mode, hold the SHUTTLE HOLD
button pressed for more than 3 seconds.
The security lock with the specified conditions
becomes active, and the LOCK indicator lights.
Note
You cannot activate the security lock when the unit is
in Playback mode.