Timer Recording Procedure - Sony HSR-X216 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

To perform timer recording over two days
Use the lowest two lines.
Set the day and time to start recording on the upper
line and those to stop recording on the lower line.
Example:
SAT
19:00 **:**
***
MON
--:-- 06:00
OFF
6
To end the settings, press the EXIT/OSD button.
Setting holidays
On the days you specify as holidays, timer recording
will be made with the same conditions set for Sunday.
You may select up to 20 days of one year as holidays.
1
Select 1. INITIAL SET from the main menu.
2
Select 3. HOLIDAY SET from the submenu.
The HOLIDAY SET display appears.
<HOLIDAY SET>
1 29-03
2 15-04
3 -----
4 -----
5 -----
6 -----
7 -----
8 -----
9 -----
10 -----
3
Turn the Jog dial to highlight the line to be set and
turn the Shuttle dial clockwise to finalize your
selection.
The month (HSR-X216)/day (HSR-X209P/X216P)
column of the selected line flashes.
4
Turn the Jog dial to set to the month (HSR-X216)/
day (HSR-X209P/X216P) and turn the Shuttle dial
clockwise to register the setting.
The day (HSR-X216)/month (HSR-X209P/X216P)
column of the selected line flashes.
**** ***
A
15
ON
11 -----
12 -----
13 -----
14 -----
15 -----
16 -----
17 -----
18 -----
19 -----
20 -----
5
Turn the Jog dial to set to the day (HSR-X216)/
month (HSR-X209P/X216P) and turn the Shuttle
dial clockwise to register the setting.
Up to 20 days can be set in the same manner.
You can also set the day and month by directly
entering the numbers with the INPUT SELECTOR
buttons 1 to 9 and the MULTI, QUAD, OPTION
or MONITOR 2 button.
6
When all settings are completed, press the EXIT/
OSD button.

Timer Recording Procedure

-
l ALARM L
LOCK
PRE REVERSE PLAY
MENU
S PAUSE
s STOP
G PLAY
ZOOM
SEQUENCE
REC
TIMER
a REC
STOP
TIMER button and indicator
To activate timer recording
Press the TIMER button.
The indicator of the TIMER button lights, and the unit
enters Timer Recording Standby mode.
Recording will automatically begin at the specified
starting time on the specified day, and the indicator of
the z REC button will light.
In timer recording, data are recorded on the normal
recording area in the picture quality specified for
normal recording.
Recording will stop at the specified STOP time.
To cancel timer recording
Cancel Timer Recording Standby mode by pressing
the TIMER button so that the indicator goes dark.
Timer recording in progress can also be stopped by
pressing the TIMER button. Recording stops
immediately.
SHUTTLE
HOLD
EXIT/OSD
SEARCH
COPY
PUSH
41
(GB)

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Hsr-x209pHsr-x216p

Tabla de contenido