1
Select ACTIVITY DETECTION SEARCH on the
SEARCH menu.
The ACTIVITY DETECTION SEARCH display
appears.
<ACTIVITY DETECTION SEARCH>
SEARCH FROM : ALARM
START
: 12-20-00 08:00
END
: 12-20-00 10:00
CHANNEL
: --
START PREVIEW c
MOVE:JOG SELECT:SHUTTLE
2
Turn the Shuttle dial clockwise to specify the area
to search on the SEARCH FROM line.
The current setting flashes.
3
Select the area(s) with the Jog dial and turn the
Shuttle dial clockwise to finalize your selection.
ALARM: To search the alarm recording area only
NORMAL: To search the normal recording area
only
ALARM & NORMAL: To search both the alarm
and normal recording areas. The unit searches
the alarm recording area first, then the normal
recording area.
4
Specify the channel on the CHANNEL line.
5
Highlight START PREVIEW and turn the Shuttle
dial clockwise.
The display changes and the thumbnail image of
the oldest picture recorded in the specified area(s)
is displayed in the preview zone.
<ACTIVITY DETECTION SEARCH>
SEARCH FROM : ALARM
START:
12-20-00 08:00
END:
12-20-00 10:00
ACTIVITY SENSOR c
c
PREVIEW
c
VIEW
MOVE/CHNG:JOG SET:SHUTTLE
SEARCHING
/CHANNEL: --
Preview zone
6
Set the starting date and time of the period for
searching at START.
7
Set the ending date and time of the period for
searching at END.
8
To set the activity detection sensor, highlight
ACTIVITY SENSOR and turn the Shuttle dial
clockwise.
The sensor marks are displayed on a 10 × 8 grid
the monitor, and the top left mark flashes.
You may set the sensing points and the sensitivity.
Using the Jog and Shuttle dials, set the marks at
the points where you wish to activate the sensor to
x and set LEVEL for the desired sensitivity value
(1 to 10).
-
-
-
-
-
-
-
-
-
-
-
-
x
x
x
-
-
-
x
x
x
-
-
-
-
-
-
x
x
x
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
LEVEL : 1
For more information, see "Setting the Activitiy Detection
Sensor" on page 37(GB).
To preview the thumbnail images
Highlight PREVIEW and turn the Shuttle dial
clockwise.
Each time you turn the Shuttle dial clockwise, the unit
searches for events recorded during the specified
period and displays in sequence thumbnail images of
the pictures for which activity was detected in the
preview zone.
To display a picture full-screen
Highlight VIEW and turn the Shuttle dial clockwise.
The unit enters Playback mode with full-screen
display, starting from the picture displayed in the
preview zone as a thumbnail image.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
EXIT
51
(GB)