Sony HSR-X216 Manual De Instrucciones página 83

d3 7 1: Channel selected
6 Reserved
5 Reserved
4 Reserved
3 Channel number 00H to 0FH: channel 1 to 16
2
1
0
d4 7 Reserved
6 Reserved
5 Reserved
4 Reserved
3 Reserved
2 Reserved
1 Reserved
0 Reserved
d5 7 Reserved
6 Reserved
5 Reserved
4 Reserved
3 Reserved
2 Reserved
1 Reserved
0 Reserved
Status information send commands
(Effective only in broadcast transmission)
These commands are to occasionally send information
of the recorder.With these commands, you can send
one byte of data following each command. These data
must be in the range of 00H to EFH. F0H to FFH are
forbidden.
STATUS LOG-1 (BFH)
CMD
TxD BF
RxD
Bit Meaning
7 1: Warning, 0: Normal
6 10: Alarm Recording Start
5 01: Alarm Recording Stop, 00: Normal
4 Reserved
3 Operating mode (listed below)
2
1
0
d1
Bit
Operating mode
3 2 1 0
0 0 0 0 No mode change
0 0 0 1 Play Stop
0 0 1 0 Still-Picture
0 0 1 1 Forward Slow Play
0 1 0 0 Backward Slow Play
0 1 0 1 Forward Play
0 1 1 0 Backward Play
0 1 1 1 Fast Forward
1 0 0 0 Fast Backward
1 0 0 1 Normal Recording Stop
1 0 1 0 Normal Recording
1 0 1 1 Timer Recording
1 1 0 0 Timer Recording Standby
1 1 0 1 Alarm Recording Stop
1 1 1 0 Alarm Recording
1 1 1 1 Reserved
STATUS LOG-2 (BEH)
CMD
TxD
RxD
Bit Meaning
7 Undefined
6 Undefined
5 Undefined
4 Undefined
3 Undefined
2 Undefined
1 Undefined
0 Undefined
STATUS LOG-3 (BDH): not used
STATUS LOG-4 (BCH): not used
BE
d1
83
(GB)