On-Screen Data Selection - Sony HSR-X216 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Preparations
<RECORDING CONDITIONS SET>
NORMAL RECORDING AREA
OVERWRITE
ALARM RECORDING AREA
OVERWRITE
REMAINING DISK WARNING
3
Turn the Jog dial to highlight the OVERWRITE
line of the area to be set and turn the Shuttle dial
clockwise.
The current setting (default: ON) flashes.
4
To deactivate the overwrite function, set
OVERWRITE to OFF and turn the Shuttle dial
clockwise.
Changing the percentage to warn the
remaining
When OVERWRITE is OFF, the FULL or ALARM
FULL indicator on the front panel will flash and an
alarm signal will be output from the FULL or ALARM
FULL terminal if the remaining capacity of the normal
or alarm recording area drops to a certain percentage.
This value is set to 1% in the default setting.
You can change it on the RECORDING
CONDITIONS SET display.
1
Turn the Jog dial to highlight the REMAINING
DISK WARNING line and turn the Shuttle dial
clockwise.
The current setting (default: 1) flashes.
2
Turn the Jog dial to set the desired value and turn
the Shuttle dial clockwise.
The value can be selected in the range of 1 to 10%.
When the settings are completed
Press the EXIT/OSD button to exit the menu.
64
(GB)
: ON
: ON
: **

On-Screen Data Selection

You may independently turn on/off the on-screen data
superimposed on the images on the monitor screen or
specify titles.
Use the submenu 1. DISPLAY SET of the main menu
3. GENERAL SET.
<DISPLAY SET>
DATE
TIME
QUALITY
AUDIO
ALARM COUNT
ALARM TYPE
TITLE
TITLE SET
VIDEO LOSS
COLOR LEVEL
DATE, TIME, QUALITY, AUDIO, ALARM
COUNT, ALARM TYPE
Specify whether to superimpose each item on the
images on the monitor screen.
For details on these items, see "On-Screen Data" on page
14(GB).
TITLE, TITLE SET
Titles can be superimposed to indicate the location,
purpose, etc. of any connected camera.
VIDEO LOSS
Set what to indicate on the monitor if the signal from a
camera is lost during live monitoring.
OFF: Only a warning message
TEST: Color-bar signal
FREEZE: The picture immediately before the signal
was lost is displayed as a still picture.
COLOR LEVEL
Set the color level (1 to 10) for camera inputs. Select
AUTO for automatic adjustment.
Changing the settings
1
Select 3. GENERAL SET from the main menu.
2
Select 1. DISPLAY SET from the submenu.
The DISPLAY SET display appears.
: ON
: ON
: ON
: ON
: ON
: ON
: ON
: TEST
: AUTO

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Hsr-x209pHsr-x216p

Tabla de contenido