Sony HSR-X216 Manual De Instrucciones página 25

Choosing the cameras to be displayed in
Automatic Switching mode
You can register which cameras' pictures are to be
displayed in Automatic Switching mode for each
quarter of a day.
Set only the camera input to be displayed to ON for
each quarter-day time period (T-1 to T-4). The camera
inputs set to OFF are skipped during the period.
For setting the time period, see "Setting the Time Period"
on page 62(GB).
1
Move the cursor to MAIN MONITOR SET or
MON. 2 SET in the SEQUENCE SET MENU (on
the previous page), then turn the Shuttle dial
clockwise.
The MAIN MONITOR SET menu or MONI. 2
SET menu appears. The setting procedure is
common.
MAIN MONITOR SET display
<MAIN MONITOR SET>
T-1
IN IN IN
01:ON 02:ON 03:ON
05:ON 06:ON 07:ON
09:ON 10:ON 11:ON
13:ON 14:ON 15:ON
(You can set only 01 to 09 with the HSR-X209P.)
2
Select the time period (T-1, T-2, T-3 or T-4) using
the Jog dial, then turn the Shuttle dial clockwise.
3
Select the camera input using the Jog dial, then
turn the Shuttle dial clockwise.
4
Select ON or OFF with the Jog dial, then turn the
Shuttle dial clockwise.
The cursor moves to the next camera input.
5
Repeat steps 3 and 4 for each camera input.
6
Perform settings for cameras for other time periods
in the same manner as described above.
When the settings are completed
Press the EXIT/OSD button to exit the menu.
IN
04:ON
08:ON
12:ON
16:ON
Masking the screen
You can select the setting of the mask function (ON or
OFF) for each camera individually.
Any camera input with the mask function ON is
displayed in gray on the monitor screen.
The mask function can be set to be automatically
switched for each time period.
For setting the time period, see "Setting the Time Period"
on page 62(GB).
1
Set 3. MASK of SCREEN SET to ON, then turn
the Shuttle dial clockwise.
The cursor moves to the MASK SET line.
2
Turn the Shuttle dial clockwise.
The MASK SET menu appears.
<MASK SET>
T-1
IN IN IN
01:OFF 02:OFF 03:OFF
05:OFF 06:OFF 07:OFF
09:OFF 10:OFF 11:OFF
13:OFF 14:OFF 15:OFF
(You can set only 01 to 09 with the HSR-X209P.)
3
Select the time period to be set (T-1, T-2, T-3 or
T-4) using the Jog dial, then turn the Shuttle dial
clockwise.
4
Select the camera input to be set using the Jog dial,
then turn the Shuttle dial clockwise.
5
Select ON or OFF with the Jog dial, then turn the
Shuttle dial clockwise.
The cursor moves to the next camera input.
6
Repeat steps 4 and 5 for each camera input.
7
Perform the setting for other time periods in the
same manner as described above.
When the settings are completed
Press the EXIT/OSD button to exit the menu.
IN
04:OFF
08:OFF
12:OFF
16:OFF
25
(GB)