Descargar Imprimir esta página

Carbel I-100 DC Manual De Montaje, Uso Y Mantenimiento página 19

Publicidad

2.2 Exterior air inlet
For the fireplace draught to work correctly, the room must have an outside air inlet from the house exterior to the
room, that is at least sufficient to replenish the volume of air that comes out of the chimney flue.
The house must always have an outside air inlet always enabled.
Air inlet must be fitted through the outer wall and if a vent is installed, it must be fitted in such a way that it cannot
be blocked.
Warning. - In homes without the appropriate outside air inlet, extraction fans (e.g. Kitchen extractors) can cause
problematic reverse chimney draughts.
Connecting outside air inlet (OPTIONAL).
The air inlet for combustion of this model is prepared to connect to an air intake duct outside the house. This
ensures a better performance of the stove in any condition.
Warning. - When the air inlet from the outside is not enabled, the air must be taken from outside of masonry
chimney chamber, or sufficient air intake must be guaranteed in this chamber.
19

Publicidad

loading

Este manual también es adecuado para:

I-80 dcI-70 dcRi-80 dcRi-100 dc