Inserting The Bobbin - JUKI HZL-353Z Serie Manual De Instrucciones

B
A
B
A
32

Inserting the bobbin

When inserting or removing
the bobbin, the needle must
be fully raised.
1. Inserting the bobbin in the
bobbin holder with the thread
running counter clockwise
direction (arrow).
2. Pull the thread through the
slit (A).
3. Draw the thread clockwise
until it slips into the notch (B).
4. Pull out about 15 cm of
thread and attached the
bobbin cover plate.
Attention:
Turn power switch to "O" before
inserting or removing the
bobbin.