ENGLISH
Although the appliance is complete with all
safety devices, during installation and connec-
tion additional devices must be added if neces-
sary to comply with the relevant legal require-
ments.
The illustration shows the position of the de-
vices .
Safety thermostat: cuts off the electricity
A)
supply in case of overheating.
The illustration shows the position of the signs
fi tted on the appliance.
Nameplate
with
A)
appliance data.
WARNING: read the manual carefully
B)
before carrying out any procedure.
WARNING: when washing the appli-
C)
ance do not point pressurised water jets at
internal parts.
WARNING: all relevant regulations
D)
must be complied with. "Install in compli-
ance with the relevant regulations and use in
well ventilated premises only".
WARNING: all relevant regulations
E)
must be complied with. "No liability is ac-
cepted in case of failure to comply with the
installation and commissioning instructions".
WARNING: watch out for hot sur-
F)
faces.
4
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
manufacturer
and
C
C
E
D
G
A
H
CE marking: this indicates that the equip-
G)
ment is compliant with all relevant laws ap-
plicable to the product.
WEEE symbol: indicates that the appliance
H)
is subject to specifi c waste disposal regula-
tions.
SAFETY
37M3202
F
C
B
3395260_ut_GB_rev.1