Angelo Po 0S1FR1E Manual De Uso página 46

ENGLISH
The appliance has been tested before com-
missioning. The information provided below
is intended to help identify and correct any
anomalies and malfunctions which might oc-
cur during use.
Some of these issues may be resolved by the
user, whereas other issues require specifi c
technical knowledge or skill, and therefore
they must be dealt with by qualifi ed staff with
recognised experience acquired in the specifi c
sector of operation.
Fault
The heating elements
do not come on
22
FAULT
TROUBLESHOOTING
Cause
Electrical connection
not made correctly
Safety thermostat
tripped
Switch faulty
NOTE:
For any need, please contact Angelo Po's
agents or headquarters, which can be found
in the contacts section of the website www.
angelopo.com.
Check the connection of the
electrical wires.
NOTE: Contact the after-sales
service.
Carry out the appliance reset
(see page 19)
Replace the switch.
NOTE: Contact the after-sales
service.
FAULT
Remedy
3395260_ut_GB_rev.1