Storage; Cleaning; Metrological Check; Repair - Chauvin Arnoux C.A 6501 Manual De Instrucciones

English
6.2

STORAGE:

Snap the crank into the recess provided for this purpose; fit the protective
cover.
There is nothing that need be removed for prolonged storage.
6.3

CLEANING:

The CA6501 must be disconnected from any electrical installation.
To clean the housing, use a cloth moistened with soapy water. Wipe off with
a damp cloth. Then dry rapidly with a dry cloth or forced air.
6.4

METROLOGICAL CHECK

Like all measuring and testing devices, the multimeter must be checked
periodically.
For checks and calibrations, get in touch with our COFRAC-accredited
metrology laboratories or with MANUMESURE Technical Centres.
Information and coordinates on request:
Tel.: +33 (0)2 31 64 51 43
6.5

REPAIR:

Repair:
following a repair other than by its customer service department or an
approved repairer.
Repair, under warranty or not
Send your instrument to one of the CHAUVIN ARNOUX-approved
MANUMESURE Regional Technical Centres
Information and coordinates on request:
Tel.: +33 (0)2 31 64 51 43
Repair outside of mainland France:
warranty or not, send the instrument back to your dealer.
24
The manufacturer cannot be held liable for any accident
Fax.: +33 (0)2 31 64 51 09
Fax.: +33 (0)2 31 64 51 09
For any repair, whether under
C.A 6501