Tritech 302-123 Manual Del Propietário página 3

IMPORTANT SAFETY INFORMATION
SAVE THESE INSTRUCTIONS - To reduce the risk of fire or explosion, electrical shock and the injury to persons,
read and understand all instruc�ons. Become familiar with setup and opera�on before using this equipment.
GROUNDING
This product must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric
shock by providing an escape wire for the electric current. This product is equipped with a cord having a
ground wire with an appropriate grounding plug. The plug must be plugged into an outlet that is properly
installed and grounded in accordance with all local codes and ordinances. Ensure ground prong is intact on the
equipment power cord, and if used, ensure the extension cord ground prong is intact as well.
WARNING - Improper installa�on of the grounding prong may result in a risk of electric shock. When repair or
replacement of the cord or plug is required, do not connect the grounding wire to either flat blade main
terminals. The wire with the green or green/yellow insula�on is the grounding wire.
Check with a qualified electrician or serviceman when the grounding instruc�ons are not completely
understood, or when in doubt as to whether the product is properly grounded. Do not modify the plug
provided. If the plug will not fit the outlet, have the proper outlet installed by a qualified electrician.
Products that operate on a nominal 110VAC circuit have a grounding plug similar to the illustrated below. Only
connect the product to an outlet having the same configura�on as the plug. Do not use a 3 to 2 blade adapter
with this product.
GROUNDED
OUTLET
GROUNDING
GROUNDED
PIN
OUTLET BOX
3