Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Table of Contents
1.
Machine overview
(standard delivery) ....................45
2.
Please read first! .......................45
3.
Safety .........................................46
3.1 Specified conditions of use .........46
3.2 General safety instructions..........46
3.3 General safety devices................47
3.4 Symbols on the machine.............47
4.
Special product features ..........48
5.
Installation and transport .........48
5.1 Machine setup.............................48
5.2 Machine transportation................48
5.3 Mains connection ........................48
6.
General operating elements.....48
7.
Crosscut and
mitre saw mode .........................48
7.1 Safety devices.............................48
7.2 Setting up for crosscut
and mitre saw mode....................49
7.3 Operation ....................................49
8.
Table saw mode ........................50
8.1 Safety devices.............................50
8.2 Setting up for table saw mode.....51
8.3 Operation ....................................52
9.
Care and maintenance..............52
9.1 Saw blade change.......................52
9.2 Drive belt tensioning....................53
9.3 Saw adjustment...........................53
9.4 Machine storage..........................54
9.5 Maintenance................................54
10. Trouble shooting.......................55
11. Repairs .......................................55
12. Environmental protection.........55
13. Technical specifications...........56
2. Please read first!
These instructions have been written in
a way which facilitates learning of how to
operate your saw safely. Here is a guide
on how you should read these instruc-
tions:
− Read these instructions before use.
Pay special attention to the safety
information.
− These instructions are intended for
persons having a basic technical
knowledge of the operation of
machines
such
as
described herein. If you have no
experience whatsoever, we strongly
recommend to seek the advise of an
experienced person.
− Keep all documents supplied with
this machine for future reference.
Retain proof of purchase in case of
warranty claims.
46
− If you lend or sell this machine be
sure to have these instructions go
with it.
− The equipment manufacturer is not
liable for any damage resulting from
neglect of these operating instruc-
tions.
Information in these instructions is indi-
cated as under:
− Numbers in illustrations (1, 2, 3, ...)
− indicate component parts;
− are consecutively numbered;
− relate
number(s) in brackets (1), (2), (3)
... in the neighbouring text.
− Instructions to be carried out in a
certain sequence are numbered.
− Instructions which can be carried
out in any sequence are indicated
by a bullet (•).
− Listings are indicated by an En Dash
(–).
3. Safety
3.1
Specified conditions of
use
The machine offers two modes of opera-
tion:
− Crosscut and mitre saw mode
the
one
for crosscutting strips, profiled stock,
etc. of wood, wood-derived materi-
als, or soft metals.
− Table saw mode
for cutting sheet-type workpieces of
wood or wood-derived materials.
The machine must be set up for the rele-
vant operating mode according to these
instructions.
Danger!
Risk of personal injury or
environmental damage.
Risk of electric shock!
Risk of personal injury
by electric shock.
Drawing-in/trapping haz-
ard!
Risk of personal injury
by body parts or clothing
being drawn into
the
rotating saw blade.
Caution!
Risk of material damage.
Note:
Additional information.
to
the
corresponding
The permissible workpiece dimensions
must be observed (see "Technical speci-
fications").
When sawing thin stock layed on edge,
a suitable auxiliary fence must be used
for firm support.
Any other use is not as specified.
Unspecified
use,
alteration
machine, or use of parts not approved
by the equipment manufacturer can
cause unforeseeable damage!
3.2
General safety instruc-
tions
•
When using this tool, observe the
following
safety
instructions
exclude the risk of personal injury or
material damage.
•
Please also observe the special
safety instructions in the respective
chapters.
•
Observe the statuary accident insur-
ance institution regulations and reg-
ulations for the prevention of acci-
dents pertaining to the operation of
circular and crosscut/mitre saws,
where applicable.
A
General hazards!
•
Keep your work area tidy – a messy
work area invites accidents.
•
Be alert. Know what you are doing.
Set out to work with reason. Do not
operate tool while under the influ-
ence of drugs, alcohol or medica-
tion.
•
Consider environmental conditions:
keep work area well lighted.
•
Prevent adverse body positions.
Ensure firm footing and keep your
balance at all times.
•
When working long stock use suita-
ble supports.
•
Do not operate tool near inflamma-
ble liquids or gases.
•
This tool shall only be started and
operated by persons familiar with
mitre saws, and who are at any time
aware of the dangers associated
with the operation of such tool.
Persons under 18 years of age shall
use this tool only in the course of
their vocational training, under the
supervision of an instructor.
•
Keep bystanders, particularly chil-
dren, out of the danger zone. Do not
permit other persons to touch the
tool or power cable while it is run-
ning.
•
Do not overload tool – use it only
within the performance range it was
designed for (see "Technical specifi-
cations").
of
the
to
Publicidad
