Descargar Imprimir esta página

Kärcher VCN 3 - 1.012-910.0 Manual De Usuario página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly
Battery Pack Install
and Removal
1. Hold the battery pack and insert it
along the guide groove. After hearing
a "click", make sure that the battery
pack is tight, secure, and locked into
place.
2. To remove the battery pack, press the
battery pack release button and pull
the battery pack in the opposite
direction. (Besides replacing the
battery pack, the battery pack does
not need to be removed from the
machine.)
Disassembly and
Assembly of
Connector tube
1. Align the button end of the connector
tube and insert it into the port of the
hand held vacuum cleaner. After it
clicks into place, make sure that the
connector tube is tight and secure.
2. To remove the connector tube, press
the release button on the connector
tube (as shown in the figure). Then
pull the connector tube out of the
vacuum cleaner.
Disassembly and
Assembly of Roller head
1. Align the upper connector of the roller
head with the end of the connector
tube (without button) and insert it into
the port of the tube. After it clicks into
place, make sure that the roller head
is tight and secure.
2. If you want to remove the roller head,
press the release button on the roller
head (as shown in the figure) and pull
the roller head out of the tube.
English 9

Publicidad

loading

Este manual también es adecuado para:

Vcn 4 - 1.012-911.0Vcn 5 - 1.012-912.0