Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: Please do not install the mount
onto a wall that regularly gets wet.
Using the Mounting
storage
1. While holding the connector tube of
the vacuum, lift the machine up. With
the bottom of the dust bin facing the
wall, place the connector tube into
the mount, and gently rest the top of
the machine onto the mount.
2. When you are ready use the
machine, take the machine out of the
mount by grabbing the connector
tube with your hand and lifting the
machine up.
Accessory Installation
This product comes equipped with
accessories to optimize the vacuum
cleaner for a variety of purposes. The
accessories can either be used with
the hand-held part of the vacuum or
can connect to the connector tube
when attached to the vacuum.
Upholstery Brush
1. Connect the hand-held vacuum
cleaner to the upholstery brush.
2. Align the upholstery brush connector
and insert it into the port of the hand-
held vacuum cleaner. After it clicks
into place, make sure that the
upholstery brush is tight and secure.
If you want to remove the upholstery
brush, just press the release button
English 11
Publicidad
