Repairing; Repairing The Pole Pruner And Battery - Stihl HTA 65 Manual De Instrucciones

Ocultar thumbs Ver también para HTA 65:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 113
English
STIHL recommends you have saw chains resharpened by a
STIHL servicing dealer.
► File each cutter with a round file so that the following
points are observed:
– Round file matches the chain pitch.
– File from the inside to the outside of the cutter.
– Hold the file at right angle to the guide bar.
– Maintain a filing angle of 30°.
► File down the depth gauges with a flat file so that they are
level with the STIHL filing gauge and parallel to the service
mark. The STIHL filing gauge must match the chain pitch.
► If you have any queries: Contact your STIHL servicing
dealer.
64

18 Repairing

18.1 Repairing the Pole Pruner and Battery

The pole pruner, guide bar, saw chain and battery cannot be
repaired by the user.
► If the pole pruner, guide bar or saw chain are damaged:
Do not use your pole pruner and contact your STIHL
servicing dealer for assistance.
► If the battery has a malfunction or is damaged: Replace
the battery.
18 Repairing
0458-766-9921-B

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hta 85

Tabla de contenido