Switching The Ebike System On/Off; Energy Supply Of The On-Board Computer - Bosch Intuvia Instrucciones De Servicio

English – 8

Switching the eBike system on/off

The following options are available for switching on
the eBike system:
– If the on-board computer is already switched on
when you insert it into the holder, the eBike system
will be automatically activated.
– When the on-board computer and the eBike battery
are inserted, briefly press the on/off button of the
on-board computer.
– With the on-board computer inserted, press the
on/off button on the eBike battery (some bicycle
manufacturer-specific solutions prevent access to
the battery on/off button; see the battery operating
instructions).
The drive is activated as soon as you start pedaling
(except for in the push assistance function or with the
assistance level OFF). The motor output depends on
which assistance level is set on the on-board com-
puter.
As soon as you stop pedaling when in normal opera-
tion, or as soon as you have reached a speed of
20/28 mph, the eBike drive unit switches off the as-
sistance. The drive is automatically re-activated as
soon you start pedaling again and the speed is below
20/28 mph.
(6)
(5)
1 270 U20 XBI | (07.04.2020)
(1)
(2)
(3)
(4)
The following options are available for switching off
the eBike system:
– Press the on/off button of the on-board computer.
– Switch off the eBike battery using its on/off button
(some bicycle manufacturer-specific solutions pre-
vent access to the battery on/off button; see the bi-
cycle manufacturer operating instructions).
– Remove the on-board computer from its holder.
If no power is drawn from the eBike drive for about
10 minutes (e.g. because the eBike is not moving)
and no button is pressed on the on-board computer
or the operating unit of the eBike, the eBike system,
and therefore also the battery, will switch off auto-
matically to save energy.
eShift (optional)
eShift is the integration of electronic gear shifting sys-
tems into the eBike system. The eShift components
are electrically connected to the drive unit by the
manufacturer. The separate operating instructions
describe how to operate the electronic gear-shifting
systems.

Energy supply of the on-board computer

If the on-board computer is in the holder (4), a suffi-
ciently charged battery is inserted in the eBike and
the eBike system is switched on, then the on-board
computer is powered by the battery of the eBike.
If the on-board computer is removed from the holder
(4), the energy is supplied via an internal battery. If
the internal battery is weak when the on-board com-
puter is switched on, <Attach to bike> will appear on
the text indicator (d) for 3 s. The on-board computer
will then turn off again.
To charge the internal battery, put the on-board com-
puter back in the holder (4) (when a battery is in-
serted in the eBike). Switch the eBike battery on by
its on/off button (see battery operating instructions).
You can also charge the on-board computer via the
USB port. To do this, open the protective cap (8).
Connect the USB port (7) of the on-board computer
via a suitable USB cable to a standard USB charger or
Bosch eBike Systems