Assembly; Operation - Bosch Intuvia Instrucciones De Servicio

Ocultar thumbs Ver también para Intuvia:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Technical Data
On-board computer
Product code
Max. USB port charging
current
USB port charging voltage
A)
USB charging cable
Operating temperature
Storage temperature
Inserting and removing the battery
For inserting and removing the eBike battery in/from
the eBike, please read and observe the battery oper-
ating instructions.
Inserting and removing the on-board
computer
(14)
(4)
(3) On-board computer
Prerequisites
The eBike system can only be activated when the fol-
lowing requirements are met:
– A sufficiently charged battery is inserted (see bat-
tery operating instructions).
Bosch eBike Systems
Intuvia
BUI255
mA
500
V
1 270 016 360
°F
+23 to +104
°F
+50 to +104

Assembly

(3)
(15)

Operation

On-board computer
Charging temperature
Internal lithium-ion bat-
tery
Protection rating
Weight, approx.
5
A) Not included with the product as standard
B) When the USB cover is closed
The Bosch eBike system uses FreeRTOS
(see http://www.freertos.org).
(4) Holder for on-board computer
(14) Locking mechanism for on-board computer
(15) Locking screw for on-board computer
To insert the on-board computer (3), slide it into the
holder (4) from the front.
To remove the on-board computer (3), push on the
locking mechanism (14) and slide it forwards out of
the holder (4).
When you park up the eBike, remove the on-
u
board computer.
The on-board computer can be secured in place to
prevent it from being removed from the holder. To do
this, remove the holder (4) from the handlebars. Put
the on-board computer in the holder. Screw the lock-
ing screw (15) (M3 thread, 8 mm long) from below
into the corresponding thread in the holder. Mount
the holder back on the handlebars.
Note: The locking screw is not designed to prevent
theft.
– The on-board computer is properly inserted in the
holder (see "Inserting and removing the on-board
computer", page English – 7).
– The speed sensor is connected properly (see drive
unit operating instructions).
°F
V
mAh
B)
lb
1 270 U20 XBI | (07.04.2020)
English – 7
Intuvia
+32 to +104
3.7
230
IP54
0.30

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bui255

Tabla de contenido