Kollmorgen
12.6.2
Washdown Food
AKM^^^-^^^^^^-^F
AKM^^^-W^^^^^-^F
The surface of the Washdown food motor has passed all tests as per FDA GlobalMigrati-
on for indirect contact with foodstuffs. Any direct contact with unpacked foodstuffs is not
permitted.
Application Area:
Example
Standards:
Surface:
Immunity:
Degree of protection
Shaft:
Rotary shaft seal:
Lubricant:
Connector:
Screws:
Name plate:
Size:
12.6.3
Tested and confirmed properties with respect to cleaning agents
The testing lab of ECOLAB Deutschland GmbH tested the resistance of the Washdown
and Washdown Food surfaces to the following industrial cleaning agents:
—
P3-topactive DES
—
P3-topactive LA
—
P3-topax 56
—
P3-topax 66
—
P3-topax 91
In the process, the surfaces were immersed in the respective cleaning agent at room
temperature for 28 days. This corresponds to approx. 2,500 cleaning cycles with
15-minute contact each with the cleaning agent or 1,500 cleaning cycles with cleaning
and subsequent disinfection.
The certificates are located in our Product WIKI on the
Kollmorgen can only give a guarantee for the motor's lifecycle if the tested cleansing
agents are used. Any cleansing agent other than those mentioned above can be tested
by Kollmorgen upon request and, if appropriate, be approved.
Servomotors AKM
04/2013
Washdown Food without flange coating
Washdown Food with flange coating of IEC A flange
Foodstuffs and drinks industry, no direct contact with unpacked
foodstuffs
Cutting, packing and filling without direct contact with food-
stuffs. Motor laterally or below the food
UL, CE, RoHs, FDA
white coating
against tested industrial cleaning agent (see page 47), corro-
sion-proof
IP67
:
Stainless steel
PTFE as per FDA
food-grade as per FDA
Stainless steel, smooth surface
Stainless Steel
Engraved, additional nameplate in the package
AKM2 - AKM6
Technical Description
.
Approvals
page.
English - 47