Publicidad
Idiomas disponibles
Idiomas disponibles
Cancelling swing
* Display when swinging (up / down) is cancelled
"Fan", "Heat"
* Display when swinging (up / down) is cancelled
"Cool", "Dry"
* Display when swinging (left / right) is cancelled
NOTE
• When the operation mode is "Cool" or "Dry", the horizontal louvers point downward but do not stop at positions
(4) or (5). If swing is stopped in positions (4) or (5), the louvers move to position (3) and then stop.
• "
" is displayed when "Louver lock" is set. Refer to "Louver lock (Fixing the angle of the louvers)"
21-EN
1140602001_EN FR ES.indb 11
1140602001_EN FR ES.indb 11
1
During swing operation, push [
] and
[
] to switch to the "Wind direction"
screen
2
Push [
] or [
]
The louvers stop at the position when [
] or
[
] is pushing.
When [
] is pushing in the display when
swing was cancelled, the louvers go to wind
direction position (1), when [
] is pushing, the
louvers go to position (3) during "Cool" or "Dry"
operation, and go to position (5) during "Fan"
or "Heat" operation, and vertical louvers go to
position (7).
– 11 –
5
Timer operation
■
Timer (Setting a timer to start or stop operation)
Selecting a timer type
NOTE
About "Off timer" and "On timer" operations
• "Off timer" and "On timer" are enabled for only 1 time.
• "Off timer" and "On timer" do not operate in the following conditions.
When "Off timer" and "On timer" are disabled, during function settings, during central control (if "ON/OFF" is
prohibited)
• When 2 remote control are connected, settings cannot be done on the "Follower remote control".
• The setting range of "Off timer" and "On timer" is a minimum of 30 minutes and a maximum of 168 hours (7 days).
• Push [
Return] to not fi x the changes, so conditions are as before changes, and return to the "Timer" screen.
• If there is a power outage, the "Off timer" and "On timer" settings are cancelled. (They become "OFF".)
• When "Off timer" and "On timer" are "ON", then "
For details on setting the "Schedule timer", refer to the Owner's Manual of the wired
remote control.
1
In "Menu", select "Timer", and push
[
Set/Fix]
2
Push [
] and [
] to select the timer you
want to set
3
Push [
Set/Fix]
" is displayed in the detailed display.
22-EN
4/22/23 4:50 PM
4/22/23 4:50 PM
Publicidad
