Sound Adjustments; Focus; Front Surround; Sound - Pioneer PDP-5000EX Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 193
Basic Adjustment Settings
09
I-P Mode
Perform optimum conversion from interlace signals to progressive
signals. This works for both video and still images.
Selections
1
2
3
7
Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit
the menu.
NOTE
Can be set only when a video signal is input. However, this
setting is not supported if either of the following conditions
apply:
• Conditions for setting "3DYC": NTSC signal input and PAL
signal input from INPUT6.
• Signals for which "I-P Mode" is not settable: 480p, 720p,
576p, 1080p.

Sound adjustments

You can adjust the sound quality to your preference with the
following settings.
Adjust the sound to your preference for the chosen AV
Selection option. See page 22.
1
Press HOME MENU.
2
Select "Sound" ( /
3
Select an item to be adjusted ( / ).
4
Select the desired level ( / ).
Sound STANDARD

Treble

Bass

Balance

FOCUS

Front Surround

Reset

Item
button
Treble
For weaker treble
Bass
For weaker bass
Balance
Decreases audio from the
right speaker.
5
Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit
the menu.
NOTE
• To restore the factory defaults for all items, press
select "Reset" in step 3, and then press ENTER (ENTER/
DISP.). A confirmation screen appears. Press
"Yes", and then press ENTER (ENTER/DISP.).
28
En
Optimum for video images
Standard setting
Optimum for still images
then ENTER (ENTER/DISP.)).
2
0
0
Off
Off
button
For stronger treble
For stronger bass
Decreases audio from the
left speaker.
/
/
to select

FOCUS

This shifts the sound coming direction (sound images) upward
and produces clear sound contours.
1
Press HOME MENU.
2
Select "Sound" ( /
3
Select "FOCUS" ( / ).
4
Select the desired parameter ( / ).
FOCUS

Front Surround

Reset
Item
Off
On
5
Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit
the menu.
NOTE
• The effect of this function differs depending on signals.
Front Surround
This provides three-dimensional sound effects and/or deep,
rich bass.
1
Press HOME MENU.
2
Select "Sound" ( /
3
Select "Front Surround" ( / ).
4
Select the desired parameter ( / ).
Item
Off
SRS
TruBass
TruBass + SRS
5
Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit
the menu.
NOTE
(WOW) designates a status where the FOCUS is on
and TruBass + SRS has been selected for Front Surround.
is a trademark of SRS Labs, Inc.
• WOW technology is incorporated under license from SRS
Labs, Inc.
• The effect of this function differs depending on signals.
to
then ENTER (ENTER/DISP.)).
Off
Off
Description
Deactivates the FOCUS.
Activates the FOCUS.
then ENTER (ENTER/DISP.)).
Description
Deactivates both the SRS and TruBass.
Reproduces highly effective three-dimensional

sound.

Provides deep, rich bass using a new
technology.
Provides both TruBass and SRS effects.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido