Connecting Hdmi Equipment - Pioneer PDP-5000EX Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 193
Enjoying through External Equipment
11
Input signal correlation table
720*480p@59.94/60 Hz
720(1440)*480i@59.94/60 Hz
For audio, the Plasma Display supports the following:
• Linear PCM (STEREO 2ch)
• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
NOTE
• PC signals are out of correspondence.

Connecting HDMI equipment

When using the INPUT2 or INPUT3 HDMI terminal:
INPUT2
INPUT3
HDMI
HDMI
HDMI cable having the
HDMI mark
(commercially available.)
To activate the HDMI terminal:
When you use the INPUT2 or INPUT3 HDMI terminal, use the
following procedure to activate the terminal.
1
Press HOME MENU.
2
Select "Setup" ( /
3
Select "INPUT2" or "INPUT3" ( /
DISP.)).
4
Select "Video" or "Audio" ( / ).
5
Set the "Video" or "Audio" setting.
6
Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit
the menu.
To specify the type of digital video signals:
1
Repeat steps 1 to 2 provided for "To activate the HDMI
terminal".
2
Select "Video" ( / ).
3
Select the type of digital video signals ( / ).
34
En
INPUT2
INPUT3
R
L
R
L
AUDIO cable
(commercially available.)
Connect the AUDIO cable only
when inputting analogue audio
signals.
HDMI equipment
then ENTER (ENTER/DISP.)).
then ENTER (ENTER/
• If you select "Auto", an attempt will be made to identify
the type of digital video signals when digital video
signals are received.
Item
Description
Auto
Automatically identifies input digital video signals.
Color-1
Digital Component Video signals (4:2:2) locked
Color-2
Digital Component Video signals (4:4:4) locked
Color-3
Digital RGB signals (16 to 235) locked
Color-4
Digital RGB signals (0 to 255) locked
4
Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit
the menu.
NOTE
• If you select a parameter other than "Auto", make such a
setting that results in natural color.
• If the images do not come in clearly, specify another digital
video signal type.
• For the digital video signal types to be specified, check the
operation manual that came with the connected equipment.
To specify the type of audio signals:
When you use the INPUT2 or INPUT3 HDMI terminal, use the
following procedure to specify the type of audio signals.
1
Repeat steps 1 to 2 provided for "To activate the HDMI
terminal".
2
Select "Audio" ( / ).
3
Select the type of audio signals ( / ).
• If you select "Auto", an attempt will be made to identify
the type of audio signals when audio signals are
received.
Item
Description
Auto
Automatically identifies input audio signals.
Digital
Accepts digital audio signals.
Analogue
Accepts analogue audio signals.
4
Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit
the menu.
NOTE
• If no sound is output, specify another audio signal type.
• For the audio signal types to be specified, check the
operation manual that came with the connected equipment.
• Depending on the equipment to be connected, you also need
to connect analogue audio cables.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido