Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
Steam and condensation set-
tle on the food and in the
cavity of the oven.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
INSTALLATION
WARNING! Refer to Safety
chapters.
Building Under
CAUTION! Only a qualified and
competent person must do the
installation of the appliance. If
you do not contact a qualified or
competent person, the
guarantee becomes invalid if
there is damage.
Before you install the appliance, fit it with
the applicable hob from the table.
Type
LEM6001E
PES6001E
PES6061E
PES6065E
All manuals and user guides at all-guides.com
Possible cause
You left the dish in the oven
for too long.
Maximum power
7000 W
6000 W
7600 W
7600 W
Remedy
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
.........................................
.........................................
.........................................
Electrical connection with the
hob
The hob connection socket is at the top of
the oven cabinet. The hob has connection
leads for the cooking zones and the ground
cable. The leads have plug-in connectors.
To connect the hob to the oven, plug the
connectors into the correct oven sockets.
The design of the plugs and sockets
prevents incorrect connections.
Progress 19
Publicidad
