About This Document; Function Of This Document; Target Group; Scope - SICK L 4000 Manual De Instrucciones

Operating Instructions
L 4000 system
1

About this document

Note
8010009/TI69/2009-11-26
About this document
Please read this chapter carefully before working with these operating
instructions and the L 4000 Safety Photoelectric Switch System,
termed L 4000 system in the following.
1.1

Function of this document

These operating instructions provide the machine manufacturer's or
machine operator's technical personnel instructions on the safe
mounting, configuration, electrical installation, commissioning, and on
the operation and maintenance of the L 4000 system.
These operating instructions do not provide instructions for operating
machines on which the L 4000 system is, or will be, integrated. Infor-
mation on this is to be found in the appropriate operating instructions
of the machine.
1.2

Target group

These operating instructions are addressed to planning engineers,
developers and the operators of plant and systems which are to be
protected by the L 4000 system. It also addresses people who inte-
grate the L 4000 system into a machine, initialise its use, or who are
in charge of servicing and maintaining the unit.
1.3

Scope

These operating instruction apply to the L 4000 system on the condi-
tion that the number 8 010 009 is given on the type label of the
safety evaluation device UE 401 in the Operating Instruction field.
1.4

Depth of information

These operating instructions contain the following information on the
L 4000 system:
Mounting
Electrical installation
Commissioning and configura-
tion
Application
The planning and use of protective devices such as the L 4000 sys-
tem also require specific technical skills that are not detailed in this
document.
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
Fault, error diagnosis and
troubleshooting
Part numbers
Conformity and approval
Care and maintenance
Chapter 1
281