Publicidad
Idiomas disponibles
Idiomas disponibles
Operation manual - Spider ILD01
11.23 TECHNICAL PLATE
The technical plate provides information on mower fillings and basic information for machine
maintenance. The technical plate is placed on the machine girder.
11.24 TOOLS
Spider ILD01 is equipped with a basic set of tools, which allow regular maintenance and basic servicing. The
tools are based under the side cover upon to the Fuel tank (see figure below). The tool roll is also equipped with
a pocked for the business card of your local authorized service/dealer.
List of tools
Spark plug spanner 19, 21 mm
Socket head 19 mm
Socket head 17 mm
Socket head 15 mm
Lever handle
Flat spanner 10-13 mm
Flat spanner 16-17 mm
Hex-wrench IMBUS 3 mm
Hex-wrench IMBUS 5 mm
Hex-wrench IMBUS 6 mm
Hex-wrench IMBUS 8 mm
Screwdriver flat-tip / crossshead
Fuses 5A, 20A
- Engine
- Engine oil
- Oil quantity
- Spark plug
- Fuel
- Hydraulic system
- Hydraulic oil
- Oil quantity
- Electronic system
- Battery
- Fuses
- Tires
- Tire type
- Maximal pressure
- Lubrication
- Chain gears
- Sliding surfaces
Use
Spark plugs
Change of blades
Change of wheels
Tightening of drive belts
-
Tightening of drive belts
By-pass, tightening of steering
chain
Wheel suspension
Wheel suspension
Wheel suspension
Tightening of steering chain
Fuse box
Fuse box
46 / 54
Placement on the machine
rev. 07-01-01-2010
Publicidad
