Publicidad
Idiomas disponibles
Idiomas disponibles
2.4 Programming the LRS-03
Once the LRS-03 has been installed, all that is now needed is to programme it so that it is
ready for use.
2.5 Recommendations
Checking the LRS-03: We recommend that the LRS-03 be checked at least once a year by
using the CB004 or CB006
calibrator. Check the unit by removing the lid from the
sensor box and introducing the sensor microphone into the calibrator. The calibrator will set
at 94 dB. This value should appear on screen. If the reading deviates to over 0.5 dB,
contact an official
distributor.
24
Publicidad
