Publicidad
Idiomas disponibles
Idiomas disponibles
6. RECOMMENDATIONS
To use the LRS-03 correctly, follow these instructions:
Make sure the LRS-03 is always connected to the mains, although when disconnected it
will continue to run from the battery.
Do not tamper with the seals placed by the authorities.
Do not tamper with the sensor.
When a printer is connected to the LRS-03 for continuous data printing, make sure it does
not run out of paper.
The LRS-03 compensates for excess music level by applying attenuation to the signal
sent to the speakers. In order to work comfortably and at the maximum possible level, we
recommend that the LRS-03 attenuate between an average of 0 and 3 dB. Working with
high attenuations around 40 dB will not increase the sound level of the music, and once
40 dB are exceeded, the LRS-03 will apply restrictive attenuation, which means that the
music will not be heard.
Make sure that the mains to which the LRS-03 is connected is properly earthed and
complies with low-tension regulations currently in force.
If you want to uninstall the limiter and store it for a long period of time, you should use the
TRANSPORT option of the programming menu, with the battery completely charged
(typical charging time: 4 hours, connected to the mains)
The LRS-03 is equipped with an internal memory fed by a 3.6 V rechargeable battery,
which allows it to keep all the measured data and configurations in the limiter even if the
12 V battery runs out. The average life of the 3.6 V battery is approximately 5 years
according to the manufacturer of the battery.
When this battery runs out, all data saved until that moment is lost. When this happens,
contact your official
dealer to replace it.
32
Publicidad
