Descargar Imprimir esta página

Wilo -Atmos BST Instrucciones De Instalación Y Funcionamiento página 32

Ocultar thumbs Ver también para Wilo-Atmos BST:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 82
en
1
General information
1.1
About these instructions
1.2
Copyright
1.3
Subject to change
2
Safety
2.1
Identification of safety
instructions
32
These instructions are an integral part of the product. Adherence to these instructions is a
requirement for the intended use and correct operation of the product:
Read these instructions before commencing any work and keep them in an accessible
place at all times.
Observe instructions and labelling on the pump.
Observe local regulations where the pump is installed.
No liability will be accepted for damage resulting from failure to follow these instruc-
tions.
The language of the original operating instructions is German. All other languages of these
instructions are translations of the original operating instructions.
WILO SE © 2023
The reproduction, distribution and utilisation of this document in addition to communica-
tion of its contents to others without express authorisation is prohibited. Offenders will be
held liable for payment of damages. All rights reserved.
Wilo shall reserve the right to change the listed data without notice and shall not be liable
for technical inaccuracies and/or omissions. The illustrations used may differ from the ori-
ginal and are intended as an exemplary representation of the product.
This chapter contains basic instructions for the individual life
cycles of the product. Failure to observe this information carries
the following risks:
Danger to persons from electrical, mechanical and bacteriolo-
gical effects as well as electromagnetic fields
Environmental damage from discharge of hazardous sub-
stances
Damage to property
Failure of important product functions
Failure of required maintenance and repair procedures
Failure to observe the instructions will result in the loss of any
claims for damages.
The directions and safety instructions in the other sections
must also be observed!
These installation and operating instructions set out safety in-
structions for preventing personal injury and damage to property,
which are displayed in different ways:
Safety instructions relating to personal injury start with a signal
word and are preceded by a corresponding symbol.
Safety instructions relating to property damage start with a
signal word and are displayed without a symbol.
Signal words
DANGER!
Failure to follow the instructions will result in serious injury or
death!
Warning!
Failure to follow instructions can lead to (serious) injury!
Installation and operating instructions • Wilo-Atmos BST • Ed.01/2023-07

Publicidad

loading

Este manual también es adecuado para:

Atmos bst-p7