WIKA GDI-100-D Manual De Instrucciones página 14

4. Design and function
Pos. Symbol
EN
4
5
10
11
Tare
12
14
The symbol lights up on:
Battery status 20 %
Outline is lit continuously
⇒
Insert new batteries (see chapter 8.2 "Battery replacement").
Density and pressure indication
The 5 ½-digit 7-segment display always indicates the current value.
If the value is no longer current, lines will be displayed (in low-power
mode over 10 s)
Matrix field serves as menu and secondary display
The matrix field consists of 4 x 21 cells (rows x columns) and serves
as a menu and secondary display.
Bar graph indicates the measured value
The bar graph consists of 20 segments and two end points at the
front and rear ends. The bar graph indicates the current measured
value proportionally to the measuring range. If the measuring range
has been underrun, the front point lights up; with an overrun, the rear
point lights up.
WIKA-Wireless
Symbol is blinking: WIKA-Wireless is active but not connected
■
Symbol is lit continuously: WIKA-Wireless is active and connected
■
TARE function active
Note: This function is not available for SF₆ units.
WIKA operating instructions, model GDI-100-D