Battery Replacement - WIKA GDI-100-D Manual De Instrucciones

8. Maintenance, cleaning and recalibration
8.2

Battery replacement

Battery replacement
▶
Do not use rechargeable batteries!
EN
▶
Always replace all three batteries together!
▶
The battery cover must be closed and locked in place!
▶
Secure the battery cover with the three screws!
▶
Ensure the correct polarity.
Procedure
1. Turn off the instrument and lay it face down.
1. Loosen the three screws of the battery compartment, see "Fig. 1 - Position of the
battery compartment".
2. Remove the battery cover.
3. Insert the three AA-sized batteries in correct polarity. Only use permitted batteries, see
chapter 8.2 "Battery replacement".
4. Put the battery cover on and screw it tight with the three screws.
⇒
Tighten the upper screw first.
Fig. 1 - Position of the battery compartment
If the instrument is not used for a long time, remove the batteries.
34 WIKA operating instructions, model GDI-100-D