Toro 76605 Manual Del Operador página 43

Moving a Non-Functioning Machine (continued)
5. Disengage the parking brake by moving both motion-control levers down to the center,
unlocked position.
Note:
6. Move the machine as required.
Always push the machine by hand. Do not tow the machine, because towing may
damage it.
7. Move the motion-control levers outward to the P
8. Move both bypass levers rearward and over through the slotted hole to lock them in
place
3465-582A
Do not start the machine.
.
IMPORTANT
position.
ARK
Page 5–4 Maintenance: Pre-Maintenance Procedures